Plunger Pump - List of Manufacturers, Suppliers, Companies and Products

Plunger Pump Product List

1～9 item / All 9 items

Displayed results
[Case Study] Automation of flow management from manual weighing to flow measurement using a flow meter.

[Case Study] Automation of flow management from manual weighing to flow measurement using a flow meter.

Automate flow management with flow meters! Solve issues such as "unable to use flow meters" and "unstable flow"!

In a paper manufacturing company that transfers and injects dyes in the production process, a plunger pump was traditionally used. As a result, there were challenges such as "the existing pump has pulsation, so a flow meter cannot be used," "overfeed phenomena occur, causing flow to be unstable," and "there may be response delays (discharge delays and liquid dripping) when starting and stopping the pump." For solutions to these challenges, please download and view the PDF materials. 【Customer Challenges】 ■ The existing pump has pulsation, so a flow meter cannot be used. ■ Measurements are taken manually with a graduated cylinder, and the pump's discharge amount is adjusted manually. ■ Due to long-distance piping and small pipe diameter, overfeed phenomena occur, causing flow to be unstable. ■ There may be response delays when starting and stopping the pump. *For more details, please refer to the PDF materials or feel free to contact us.

  • pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study] Stable Injection of Chelating Agents to Prevent Heavy Metal Leaching

[Case Study] Stable Injection of Chelating Agents to Prevent Heavy Metal Leaching

Solving issues such as "looseness and leakage" when using plunger pumps! Introducing case studies from local governments (wastewater treatment plants).

The local government (sewage treatment plant) was using a plunger pump to add a chelating agent (ferrous sulfate solution) to prevent the leaching of heavy metals contained in the incineration ash after incinerating sludge at the sewage treatment plant. However, there were issues such as "the piping vibrated due to the pump's pulsation, causing loosening and leaks" and "the pump had run dry and malfunctioned when the chemical tank was empty." For solutions to these issues and requests, please download and view the PDF materials. 【Customer's Issues and Requests】 ■ The piping vibrated due to the pump's pulsation, causing loosening and leaks. ■ The pump had run dry and malfunctioned when the chemical tank was empty. *For more details, please refer to the PDF materials or feel free to contact us.

  • pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study with Video Explanation] Plunger Pump - Filling Hair Gel

[Case Study with Video Explanation] Plunger Pump - Filling Hair Gel

Introducing a case of filling hair gel using a plunger pump *video explanation*.

We will introduce a case where the dedicated controller for the plunger pump, "ST500," was used to operate the plunger pump. A hopper and cutoff nozzle were installed on the plunger pump, and hair gel was filled in two patterns: single-action operation and continuous operation. Furthermore, using an electronic scale, a total of four fillings were performed to measure the filling accuracy. ★You can check the details in the video below, so please take a look. *For more information, please refer to the related links or feel free to contact us. Demo units are also available for loan.

  • pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study with Video Explanation] Plunger Pump - Miso Filling

[Case Study with Video Explanation] Plunger Pump - Miso Filling

Introduction of a filling case for high-viscosity miso using a plunger pump *Video explanation

We will introduce a case where the dedicated controller for the plunger pump, "ST500," was used to operate the plunger pump. A hopper and cutoff nozzle were installed on the plunger pump, and miso, a representative of high-viscosity fluids, was filled in two patterns: single-action operation and continuous operation. Furthermore, using an electronic balance, a total of four fillings were conducted to measure the filling accuracy. ★You can check the details in the video below, so please take a look. *For more information, please refer to the related links or feel free to contact us. We also offer demo units for loan.

  • pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study] Transporting Abrasive Slurry Without Liquid Leakage

[Case Study] Transporting Abrasive Slurry Without Liquid Leakage

Solving issues such as 'the sliding part wears out and causes liquid leakage' and 'the pulsation does not completely disappear, resulting in an uneven coating'!

A manufacturer of automotive parts that applies coatings to automotive components was using a plunger pump for liquid supply. As a result, there were challenges such as "wear of the sliding parts causing liquid leakage" and "using an air chamber but not completely eliminating pulsation, leading to uneven coating." For solutions to these challenges, please download and view the PDF materials. 【Customer Challenges】 ■ Wear of sliding parts (plunger, plunger seal) causing liquid leakage ■ Pulsation not completely eliminated, leading to uneven coating ■ Considered using a non-pulsating rotary pump, but it could not be used due to color variation caused by shear and friction heat *For more details, please refer to the PDF materials or feel free to contact us.

  • pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Rental] Grout Pump 'SG-30SV'

[Rental] Grout Pump 'SG-30SV'

From jet grouting methods to mixing machine methods! Injecting grout with various ground improvement techniques.

The "SG-30SV" is a grout pump that enables stable injection with minimal pulsation. It achieves high efficiency, easy maintenance, and safety at a high level. Additionally, we offer models such as the "SG-60SV" with a rotation speed of 266/133 min-1 and the "SG-200SV" with 260/215 min-1. 【Features】 ■ A pump for injecting grout in various ground improvement methods, from jet grouting to mixing machine methods. ■ A plunger pump that allows for stable injection with minimal pulsation. ■ High efficiency, easy maintenance, and safety achieved at a high level. *For more details, please refer to the PDF materials or feel free to contact us.

  • グラウトポンプ『SG-30SV』2.PNG
  • グラウトポンプ『SG-30SV』3.PNG
  • グラウトポンプ『SG-30SV』4.PNG
  • pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Plunger Pump "PL-C/PL-R Series" *Demo units available for loan

Plunger Pump "PL-C/PL-R Series" *Demo units available for loan

High precision discharge accuracy is possible, and maintenance is also easy! Simplified component structure.

The high-precision "PL-C Series," high-viscosity compatible high-precision "PL-R Series," and large flow "PLX-C/PLX-R Series" are plunger pumps with high individual component accuracy, allowing for discharge volume adjustment using a high-precision micrometer. It is possible to select the materials for the wetted parts according to the transfer liquid used. Since the suction and discharge speeds can be adjusted individually, optimal discharge volume, discharge accuracy, and takt time (filling speed, coating cycle, etc.) can be set. Additionally, the simplified component structure allows for disassembly maintenance without the use of special tools. 【Features】 ■ Achieves discharge accuracy of ±1% ■ Selection of wetted parts is possible ■ Optimal settings can be made ■ Maintenance is easy due to the simplified component structure *For more details, please refer to the related links or feel free to contact us. Demo units are also available for loan.

  • pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study with Video Explanation] How to Use a Plunger Pump Controller

[Case Study with Video Explanation] How to Use a Plunger Pump Controller

Introducing an example of operating a plunger pump using a controller *video explanation*.

We would like to introduce a case where the dedicated controller for the plunger pump, "ST500," was used to operate the plunger pump. A hopper and cutoff nozzle were installed on the plunger pump, and hair gel was filled in two patterns: single-action operation and continuous operation. The hair gel is filled into containers by the plunger pump from the top of the hopper. Additionally, there is an example of using a foot switch with the controller. ★ You can check the details in the video below, so please take a look. * For more information, please refer to the related links or feel free to contact us. Demo units are also available for loan.

  • pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study with Video Explanation] Plunger Pump - Filling Honey Gel

[Case Study with Video Explanation] Plunger Pump - Filling Honey Gel

Introduction of honey filling examples using a plunger pump *Video explanation

We would like to introduce a case where the dedicated controller for the plunger pump, "ST500," was used to operate the plunger pump. A hopper and cutoff nozzle were installed on the plunger pump, and honey was filled in two patterns: single-action operation and continuous operation. Additionally, using an electronic balance, a total of four fillings were performed to measure the filling accuracy. ★You can check the details in the video below, so please take a look. *For more information, please refer to the related links or feel free to contact us. We also have demo units available for loan.

  • pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Related Categories of Plunger Pump

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.